How to Change a Mountain Bike Tire: Detailed Guide

It might seem like a troublesome assignment to change the tire on your mountain bike without the help of anyone else, however, it isn’t by any means. It’s getting simpler to evacuate tires without devices like the BMX bikes for street riding.

Regardless of whether you are not technically inclined or well informed, you can change the tire without anyone else. There are just a couple of steps to follow to know how to change a mountain bike tire.

There are likewise various explanations behind changing the tire out on your mountain bicycle that may include a busted or cut tire. You may even need to change over from rough terrain to street tires so you can ride easily out and about. In any case, here is the step by step method on how to change a mountain bike tire.

Removing the Tire from the Mountain Bike

Using your Bare Hands to Remove the Tire

• Remove the valve.
• Allow the air to come out.
• Take the lock nut away from the valve.
• Loosen the globule of the tire by utilizing your thumbs to break the dab.
• Break the globule of the rims free from the edge where it is trapped.
• Push the tire toward the centre of the rim. Do that right around the whole rim.
• Pull the tire to the side; make sure you are pushing it to the non-disc side of the wheel.
• You can now pull the tire up and push the tire with the other hand towards the side of the rim.
• Then attempt to push the outside beat of the tire over the rim.
• As soon as you get a little piece of the tire pushed over the outside edge, the remainder of the tire will fall off easily.

Using a Tire Lever to Remove the Tire

On the off chance that you battle to get the tire off from the rim with your bare hands, you may utilize a tire lever. However, try not to utilize a metal tire lever, particularly not while removing a tire from a carbon rim or soft metal rim.

Firstly, push the tire switch gently in the hole between the tire and the rim.

If you drive the switch in excessively far, you may squeeze the inner tube on the off chance that it’s not a tubeless tire.

As soon as you have the switch between the rim and the tire, twist the tire switch down towards the floor.

Then snare the tire switch onto a spoke with the little snare on the tire lever when you can.

Now put in another plastic tire lever similarly as the first, around four to five inches away.

Make sure you push the tire switch under the dab and lift the tire by bending the tire switch towards the floor once more.

Once you have a length of the tire lifted over the outside edge of the rim, the entire tire should fall off.

Good Read: How Much Do Bikes Weigh?

Removing the Tube

The second step on how to change a mountain bike tire is removing the tube from the tire and the rim.

With the one side of the tire evacuated, you ought to have the option to remove the tube from the tire and the rim.

Make sure you start at the valve side while removing the tube from the rim. When the tube is removed, you would now be able to begin with the opposite side of the mountain bike wheel.

Removing the Rest of the Tire from the Rim

Again it might be ideal on the off chance that you went a similar way you did with the primary portion of the tire to the contrary side of the plate.

It would make it less stressful removing the tire in the same direction you did earlier while removing the first half of the tire.

Now, all you need to do is push the rear of the tire that is still over the rim towards the outside edge of the rim.

You don’t have to stress yourself while doing this; the entire tire should fall off after a minor opposition.

Replacing the Tire with a New One

• Make sure your rotational heading is right.
• When you hold the edge, the disc ought to be on the left-hand side of the edge.
• Line the tire up with the valve opening.
• First of all put the rim into the tire.
• Now you can work one dot of the tire onto the rim.
• Begin at one side and continue around until you got a large portion of the tire onto the edge. That is the principal half of the tire.
• When you have a large portion of the tire on, it will get somewhat tight. Here you can utilize the tire lever to lift the last part over the edge.
• Now you are using a tube, you can now change the tube. Starting with the valve side of the cylinder and work it under the tire onto the rim.
• Then you get the second bead onto the edge by working your way around, away from the valve, right around.
• However, be mindful so as not to squeeze the cylinder with the globule.
• If you utilize tubeless, put the sealant in when you are about done.
• Put the last piece of the dab a similar route on as the main bead.

And in just a few minutes, you’ve learnt how to change a mountain bike tire.